मालवीय राष्ट्रीय प्रौद्योगिकी संस्थान जयपुर (राष्ट्रीय महत्व का संस्थान)
Malaviya National Institute of Technology Jaipur (An Institute of National Importance)
Department of Metallurgical and Materials Engineering
Go Back

18

Journal Publications

4

Conference Publications

Qualifications
  • Ph.D.(Metallurgical and Materials Engineering) from NIT Rourkela(2022)
    M. Tech.(Metallurgical and Materials Engineering) from NIT Rourkela(2016)
    B .Tech.(Metallurgical and Materials Engineering) from IGIT Sarang(2013)
Research Interests

Crystallographic Texture, Deformation Behavior of Metals, Magnesium Alloys, Annealing Phenomena, Mechanical Alloying.

Professional Background
  • Assistant Professor at Malaviya National Institute of Technology Jaipur [29 December 2023 - Present].
    Postdoctoral Fellow at Indian Institute of Science Bengaluru [28 August 2023 - 28 December 2023].
    Assistant Professor at O. P. Jindal University, O.P. Jindal Industrial Park, Punjipathra, Raigarh, Chhattisgarh 496001 [17 August 2022 - 01 July 2023].

  • Design and selection of materials
  • Heat Treatment
  • Introduction to Engineering Materials
  • Physical Metallurgy of Special Purpose Alloys
  • Steel Making

    2026
  • G. Das, R. K. Sabat, P. Patel, D. Panda, S. Suwas, K. Kapoor, S. K. Sahoo, "Microstructure and texture evolution during fabrication of titanium tubes for aerospace applications" , Philosophical Magazine (Taylor & Francis) Volume :106 / 41-61 / 2026 DOI: 10.1080/14786435.2025.2547406
    • 2025
  • Banti Chauhan, Deepankar Panda, P. Patel, S.K. Sahoo, Vijay Navaratna Nadakuduru, Brij Mohan Mundotiya, "Effect of hBN Content on Corrosion Behaviour of Ni-Ag-based Composite Coatings for Marine Applications: A Design Strategy" , Surfaces and Interfaces (Elsevier) Volume :76 / 107965 / 2025 DOI: https://doi.org/10.1016/j.surfin.2025.107965
  • N. K. Sahu, R. K. Naik, D. Panda, S. K. Sahoo, P. K. Kar, S. K. Badjena , "Weld Morphology and Corrosion Characteristics of Flux-Assisted Gas Tungsten Arc-Welded Super Duplex Stainless Steel" , Journal of Materials Engineering and Performance (Springer ) Volume :35 / 5828-5842 / 2025 DOI: https://doi.org/10.1007/s11665-024-09582-5
    • 2023
  • NK Singh, A Kumar, R Dawn, S Jena, A Kumari, VR Singh, M Zzaman, R Shahid, D Panda, SK Sahoo, UK Goutam, VK Verma, K Kumar, M Khatravath, A Priyamt, "Resonance Photoemission Spectroscopic Study of Thermally Evaporated NiTiO3 Thin Films" , Journal of Electronics Material (Springer ) Volume :52 / 669 / 2023 DOI: 10.1007/s11664-022-10037-7
  • A. Kumari, A. Kumar, R. Dawn, J. Roy, S. Jena, R. Vinjamuri, D. Panda, S. K. Sahoo, and V. R. Singh, "Effect of Annealing Temperature on the Structural, Electronic and Magnetic Properties of Co doped TiO2 Nanoparticles: An Investigation by Synchrotron-Based Experimental Techniques" , Journal of Alloys and Compounds (Elsevier) Volume :933 / 167739 / 2023 DOI: 10.1016/j.jallcom.2022.167739
    • 2022
  • S. N. Alam, P. Shrivastava, D. Panda, B. Gunale, K. Susmitha, and P. Pola, "Synthesis of Al2Cu Intermetallic Compound by Mechanical Alloying" , Materials Today Communications (Elsevier) Volume :31 / 103267 / 2022 DOI: 10.1016/j.mtcomm.2022.103267
  • D. Panda, R. Kushwaha, R. K. Sabat, S. Suwas, and S. K. Sahoo, "Microstructure and texture evolution during grain growth of AM30 magnesium alloy" , Philosophical Magazine (Taylor and Francis) Volume :102 / 2207 / 2022 DOI: 10.1080/14786435.2022.2102263
  • D. Panda, R. K. Sabat, S. Suwas, and S. K. Sahoo, "Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg3Al0.2Ce alloy" , Philosophical Magazine (Taylor & Francis) Volume :102 / 1091 / 2022 DOI: 10.1080/14786435.2022.2030065
  • D. Panda, S. Tripathy, R. K. Sabat, S. Suwas, and S. K. Sahoo, "An investigation on the correlation between microstructure, texture and mechanical properties of Mg and its alloys" , Journal of Materials Engineering and Performance (Springer) Volume :31 / 9183 / 2022 DOI: 10.1007/s11665-022-06934-x
  • N. Sahu, D. Panda, S. K. Badjena, and S. K. Sahoo, "Multicomponent flux for improved penetration and metallurgical properties using A-GTAW" , Journal of Materials Engineering and Performance (Springer) Volume :32 / 4237 / 2022 DOI: 10.1007/s11665-022-07383-2
  • A. Singh, R. Dawn, V. K. Verma, D. Panda, S. K. Sahoo, K. Kumar, and V.R. Singh, "Electronic and magnetic properties of FeCr2O4 nanoparticles by advanced synchrotron based soft X-ray magnetic circular dichroism" , Physica B: Condensed Matter (Elsevier) Volume :647 / 414373 / 2022 DOI: 10.1016/j.physb.2022.414373
    • 2021
  • P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Development and mechanical properties investigation of Cu-MWCNT-graphite Nanoplatelets hybrid Nanocomposites" , Diamond and Related Materials (Elsevier) Volume :117 / 108467 / 2021 DOI: 10.1016/j.diamond.2021.108467
    • 2020
  • P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Effect of addition of multiwalled carbon nanotube/graphite nanoplatelets hybrid on the mechanical properties of aluminium" , Diamond and Related Materials (Elsevier) Volume :104 / 107715 / 2020 DOI: 10.1016/j.diamond.2020.107715
    • 2019
  • D. Panda, R. K. Sabat, S. Suwas, V. D. Hiwarkar, and S. K. Sahoo, "Texture weakening in pure magnesium during grain growth" , Philosophical Magazine (Taylor and Francis ) Volume :99 / 1362 / 2019 DOI: 10.1080/14786435.2019.1581382
    • 2018
  • S. N. Alam, N. Sharma, D. Panda, A. Kumar, D. Sampenga, A.Sairam, V. Sarky, and MB Krupateja, "Mechanical milling of Al and synthesis of in-situ Al2O3 particles by mechanical alloying of Al-CuO system" , Journal of Alloys and Compounds (Elsevier) Volume :753 / 799 / 2018 DOI: 10.1016/j.jallcom.2018.03.273
    • 2017
  • D. Panda, P Bhuyan, L Kumar, and S. N. Alam, "Synthesis of Fe3Al Intermetallic Compound by Mechanical Alloying" , Arabian Journal for Science and Engineering (Springer) Volume :42 / 4427 / 2017 DOI: 10.1007/s13369-017-2526-y
  • R. K. Sabat, S. K. Sahoo, D. Panda, U. K. Mohanty, and S. Suwas, "Orientation dependent recrystallization mechanism during static annealing of pure magnesium" , Materials Characterization (Elsevier) Volume :132 / 388 / 2017 DOI: 10.1016/j.matchar.2017.09.003
  • R. K. Sabat, D. Panda, and S. K. Sahoo, "Growth mechanism of extension twin variants during annealing of pure magnesium: An ex situ electron backscattered diffraction investigation" , Materials Characterization (Elsevier) Volume :126 / 10 / 2017 DOI: 10.1016/j.matchar.2017.02.008

    2017
  • Pallabi Bhuyan, Syed Nasimul Alam, D. Panda, Lailesh Kumar, Harspreet Singh, "Synthesis and Characterization of Cu-Fe3Al Composites Using Powder Metallurgy Route" , 5th International Conference on Materials Processing and Characterzation by :Elsevier at GRIET Hyderabad / 213 / 2017 ISBN: 2214-7853
    • 2016
  • Pallabi Bhuyan, Harspreet Singh,Lailesh Kumar,Nidhi Sharma,D. Panda, Deepanshu Verma, Syed Nasmul Alam, "Development of Cu-E-Glass Fiber Composites by Powder Metallurgy Route." , 5th National Conference on Processing and Characterization of Materials by :IOP Conference Series: Materials Science and Engineering at NIT Rourkela / 012023 / 2016 ISBN: 1757-8981
  • L. Kumar, S. N. Alam, S. Sahoo, D. Panda, "Synthesis of TiB2 Nanocomposites by Powder Metallurgy Route" , International Conference on Recent Trends in Engineering and Material Sciences (ICEMS2016) by :ELSEVIER at Jaipur / 9883 / 2016 ISBN: 2214-7853
    • 2015
  • D. Panda, Lailesh Kumar and Syed Nasimul Alam, "Development of Al-Fe3Al Nanocomposite by Powder Metallurgy Route" , 4th International Conference on Materials Processing and Characterzation by :Elsevier at GRIET, Hyderabad / 3565 / 2015 ISBN: 2214-7853

  • Book Chapter, "Performance of microwave irradiated WC-Co insert during dry machining of Inconel 718 superalloys" ISBN:9780-1282-2124-2 published by - Woodhead Publishing Year: 2021 authors- T. Jadam, D. Panda, S. Chatterjee, S. Datta, S. K. Sahoo, and S. C. Mishra
  • Book Chapter, "Study of Tribological Behavior and Wear Mechanism of Nanocomposite Coatings" ISBN:9781-1198-1878-6 published by - John Wiley & Sons, Inc. Year: 2022 authors- L. Kumar, P. Shrivastava, D. Panda, A. Ghosh, and S.N. Alam

  • National level Workshop on "Advanced Materials Characterization (AMC-2024)" at Department of Metallurgical & Materials Engineering, MNIT Jaipur, Jaipur, India from 19-03-2024 to 23-03-2024

  • National level Conference on NMD-ATM at Hotel Uday Samudra and Samudra, Kovalam, Trivandrum, India from 13-11-2019 to 16-11-2019
  • National level Conference on NMD-ATM at Birla Institute of Technology and Sciences (BITS) Pilani, K K Birla Campus, Vasco da Gama, India from 11-11-2017 to 14-11-2017

  • Life time member of Indian Institute of Metals

  • Member, Editorial Board, Annual Report and Annual Accounts 2024-26 in MNIT Jaipur from - 08-07-2025 to Till Date
  • Faculty Coordinator in office of Dean International & Alumni Affairs in MNIT Jaipur from - 17-10-2024 to Till Date
  • Faculty-In-Charge in Debate Club in MNIT Jaipur from - 06-09-2024 to Till Date
  • Faculty-In-Charge in Dept. Annual Progress Report in Department of Metallurgical and Materials Engineering, MNIT Jaipur from - 03-06-2024 to Till Date

SNo. Type Title Event Place Schedule
1TalkEvolution of microstructure, texture, and mechanical properties of pure Mg and its alloys during grain growth38th National Convention of Metallurgical and Materials Engineers, Conference titled on "CBPM-2025"NIT RourkelaJul-2025
2TalkNomenclature & Heat Treatment of Aluminum AlloysOne Day Workshop on "Optimizing Aluminium Casting: Melting, Metallurgy, Metal Treatment & Quality"The Institution of Engineers (India) Rajasthan State Centre, JaipurMay-2025